Dodge
TGC: 03-13 Dodge 2500/3500 5" Rear Lift Block & U-Bolt Kit
Product Classification:
Block & U-Bolt Kits
Brand:
Top Gun Customz
MFG Part #:
2925320G
This product fits the following vehicle(s):
2003-2013|Dodge|2500::4x4 Models Only^^2003-2013|Dodge|3500::4x4 Models Only
Drivetrain (if applicable):
4x4
Fueltype (if applicable):
Gas
Top Gun Customz is proud to introduce our NEW Heavy Duty Steel Fabricated 5" Rear Blocks for the 2003-2011 Dodge Ram 2500/3500 4x4 (Gas Only) Also fits the 2006-2010 1500/2500/3500 Mega Cab Models (Gas Only).
This is a product any owner of a lifted Dodge would want! This is a hand fabricated rear lift block. Our rear blocks come in more sizes than anyone. We offer them in 1" - 6" heights, in 1/2" increments, meaning 1", 1.5", 2", 2.5", etc....up to 6". ?What are some features that make ours different than almost any other lift block out there? ....
These blocks are not cast, but fabricated from steel plate. The finish is smooth, not course like a cast block. Many cast blocks even come raw w/ no finish. Ours comes with a black finish. They are fully gusseted and are stronger than any cast block...and come w/ our LIFETIME GUARANTEE!
We think you will agree this the best lift block for the rear of these trucks...bar none! We feel so strong about that, we will give you a 100% refund of the purchase price plus shipping if you don't like them and wish to return them.
NOTE: 1" - 3.5" Block DO NOT come with middle gussets inside
Made specific for the 03-10 Dodge Ram 2500/3500 4x4 (Gas Only) :
These trucks use a dual center pin on the rear spring. Our blocks have 3 holes on the Top side which those pins sit down into. This "locks" the block w/ the spring. Most companies use a "universal" rear block. Look at the comparison image for reference. A "universal" or "one block fits all" block does not have specific holes for the pins. The central pin will sit in the central hole in that block, but the outer pins will simply sit in the oversize void on each end. This does NOT lock the block in from side to side and can cause the block to shift around from side to side....not good. ?Also, usually the pin is a universal size and not specific to these trucks. Our pins are the correct size to sit securely on the axle and the holes on the Top side of the block allow the spring pins to sit securely in with zero movement.
Benefits: Compare for Yourself : Kit Includes: Important Notes:
Our blocks feature a 3 hole "locking" feature. To securely lock our blocks the place.
These blocks are 3" wide, just like the spring and the spring pad. To ensure an even contact with the block and spring
Our blocks are not cast, but fabricated steel plate. Ensuring the most reliable and heavy duty block out there.
Features a black smooth finish to ensure less rusting than normal cast iron blocks.
Don't forget about all of our other Dodge
Our blocks are 3" wide, just like the spring and the spring pad. Why mount a block that is 2.25" wide under a spring that is 3" wide? A full 3/4" of the spring will not be making contact with the block.
The smaller sizes have no taper and the larger sizes have the proper taper, or angle.
(2) Heavy Duty Steel Fabricated 5" Rear Blocks
(4) Rear U-Bolts
All Necessary Hardware and Detailed Instructions
Requires new rear shocks.
Must know exact axle size to ensure proper U-bolts are received.
- All standard shipping guaranteed with-in 10 business days. Upon recieving full payment. (Continental 48 states only)*
- We do not ship to P.O. Boxes.
- Additional shipping fees do apply to Alaska, Hawaii, and ALL other Countries within our shipping range. You MUST contact us prior to ordering, for an exact shipping quote or method to any destination outside the continental U.S. without a previously written shipping quote or method.
- Prior to beginning your install, please verify that you have received all items ordered.
- There is a 15% restocking fee on all uninstalled returns.
- No returns after 30 days.
- Top Gun Customz will not accept checks in any amount over $2,500.00. Any order totals that exceed this amount will have to be paid for by Money Order, Credit Card, Certified Bank Check, PayPal, or Cash at our business location.
- As Check Collect (Disclaimer): RETURNED CHECKS will be processed Electronically for check amount plus State allowed fees.
- Order cancellations before shipment will result in a minimum fee of 5% of total invoice to offset all processing fees. Other fees that may affect your cancellation are any eBay or Paypal fees associated with your purchase..
- **All drop-shipped items are subject to the policies and procedures set forth by the corresponding manufacturer of said products. (ie. If Rough Country drop-shipped the item that you purchased from us, and you decide to return it, it will need to be returned to Rough Country, and you will then incur all additional fees associated that are above and beyond our standard policies.)
- To return any product you have to have an RGA#. (an RGA# is a reference to the authorization to return your item(s) granted by the manufacturer to whom you wish to return the item(s) to.)
- Once an RGA# is issued you must write this on the outside of the box clearly and return it back to the appropriate warehouse.
- The product must be returned in the same condition as it was received in.
- The customer is responsible for the shipping cost and liable for any damage to the product before the product is shipped and until the product is delivered and inspected.
- Once the package is delivered to the appropriate warehouse it must be checked in and checked by Quality control. This process can take a few business days.
- Once the product has been checked in and is able to be put back into inventory, we will refund back the customer minus any restocking fee's that have incurred or reship the appropriate part out.
- No returns after 30 days.
- If a part is returned and is damaged and/or cannot be put back into inventory due to the damage, the customer is responsible to either get the part back by paying for shipping back out to them, or taking a full loss of product and all money associated to that part.
Return Policy
If for any reason you are not satisfied with your purchase. You may schedule to return it within 7 days of when you received the product. Simply notify us by phone. We will then issue a Return Material Authorization Number. If the items are returned in perfect resalable condition, actual shipping charges paid by Road Armor will be deducted from the purchase price, unless the return is due to our error. After 15 days ALL SALES ARE FINAL. The following terms must be met by you.
- The Return must be scheduled with us within 7 days of your original receipt of the order.
- The products must be returned in new, resalable condition.
- You must include all packaging materials.
- Packaging materials must not be torn or damaged.
- You must pay any return shipping expense.
Display the RMA # prominently on the outside of the unit to avoid delays to your refund. Upon receipt of the returned merchandise and in good order in accordance with the above and within 7 days of original delivery. Road Armor then has 14 business days to inspect the unit after delivery at which time we will issue credit to your charge account if all of the above are met.
Refund Policy
Will be processed no later then 21 days from the date of request of cancellation from customer; they will be paid no later then 30 days from the date of being processed. All refunds will be by company check.
|
FACEBOOK
YOUTUBE
INSTAGRAM
GALLERY