Gain additional tire clearance to fit 33" tires and get a new new look with this Tuff County Toyota Tundra 5" lift kit. This Toyota Tundra lift kit uses new replacement heavy duty spindles that eliminate the need for ball joint spacers. Upper ball joints & bearings are pressed into the new spindles. Upper coil / strut spacers are used to lift the front end and maintain a factory ride. Replacement struts are not required. A lower subframe drops the lower control arms while stabilizing the front end with its one piece design. Once installed 33" x 12.5" tires can be mounted for a whole new look.
Heavy duty replacement spindles
Upper coil / strut spacers maintain a near factory ride
Stock front struts can be retained
One-piece subframe for added strength
Allows use of 33" tires (33"x12.5" Recommended)
Upper ball joints &bearings pressed into new spindles
Average Install Time: 8-10 hours
Amount of Lift: 5" Front / 3" Rear
REAR SHOCKS SOLD SEPERATELY
This System Includes... Quantity
One piece subframe 1
Upper strut spacers 2
Heavy duty steering knuckles 2
Differential drop brackets 2
Sway bar drop brackets 2
Steering shaft extension 1
Cast iron 3" rear lift blocks 2
Rear ubolts 4
Hardware bag 1
Fits following years:
99, 00, 01, 02, 03
1999, 2000, 2001, 2002, 2003
Fits following models:
Factory length shocks must be replaced with new extended rear shocks to install this lift kit properly. Please read below for shock & boot options if you have not already purchased extended shocks.
Front struts can be retained
Factory rims will not fit with this lift kit. Rims with a 4.5" back spacing or less is required.
This kit is designed to fit with ABS brakes and automatic hubs. Vehicles without ABS brakes require optional ABS plugs.
Write the First Review!
You must login to post a review.