Top Gun Customz is proud to offer you this 4.5" EZ-Ride suspension lift kit - w/pitman arm for the 00-02 Dodge Ram 2500/3500 4x4 truck ! It is made by Tuff Country and is being offered by Top Gun Custom z. Get additional tire clearance to fit 35" tires and get a cool new look with this Tuff Country Dodge Ram 4.5" lift kit. This Dodge lift kit uses coil spring tower brackets that mount above your factory coil springs to lift the front end. Rear cast iron blocks (replace the factory blocks) and rear add-a-leafs lift the rear of the Dodge Ram. The advantage of using the coil tower brackets is you maintain a factory ride while being securely bolted in above your factory coil springs. Extended upper and lower control arms w/poly bushings, a track bar relocating bracket, drop pitman arm and front sway bar relocating brackets ensure everything is aligned properly. Tuff Country has been producing quality suspension products for over 20 years and backs all lift kits with a limited lifetime warranty. System Benefits: Upper and lower control arms included to maintain proper alignment Upper coil spring tower brackets retain a factory ride Pitman arm included New track bar bracket included Allows use of 35" x 12.5" tires Amount of Lift: 4.5" Front / 3" Rear LIMITED LIFETIME WARRANTY! This System Includes... Quantity 4.5" Upper coil spring tower brackets 2 Upper control arms 2 Lower control arms 2 Track bar bracket 1 Sway bar drop brackets 2 Track bar support bracket 1 Rear add-a-leafs 2 5.5" Rear lift block (replaces factory block) 2 U-bolts 4 Pitman arm and required hardware 1 REPLACEMENT SHOCKS NOT INCLUDED WITH THIS KIT Fits following years: 00, 01, 02 2000, 2001, 2002 Fits following models: Ram 2500 4x4, Ram 3500 4x4 Special Notes... Factory length shocks must be replaced with new extended rear shocks to install this lift kit properly. Please read below for shock & boot options if you have not already purchased extended shocks. Will not fit with Off-Roadster models Replacement U-bolts REQUIRED for vehicles with factory contact overloads Will not fit vehicles with Dana 70 or Dana 80 front differential Carrier Bearing Drop Kit REQUIRED for vehicles equipped with 2-piece rear drive shafts Will not fit vehicles manufactured 10/93 - 2/94 If you have any questions regarding upgrades or kit components, please contact us Toll Free at 1-877-274-9362
Below is a list of vehicles that this product is designed for.