Want to lift your Dodge Ram and get the best possible ride and handlingWant more suspension articulation Tuff Country EZ-Ride Suspension's Dodge Ram "Long Arm" Lift Kits are your answer!
This lift kit is designed to lift your Dodge Ram 4.5" using the long arm suspension system and all the great benefits. By replacing the factory control arms with the longer arms this creates less of an angle on the control arms which results in a much softer ride, dramatic handling improvements (reduces bump steer significantly) and better suspension articulation . Both upper and lower arms use greaseable, re-build able flex joints which will reduce or eliminate the front suspension from binding. The built-in adjuster sleeves allows for much easier adjustment of the castor which eliminates the need for the OEM cam bolts. The adjustable length lower control arms makes it easy to center the front tires in the wheel wells. Upper coil spring tower spacers mount above your factory coil springs to lift the front end and maintain a factory ride . A track bar relocating bracket, drop pitman arm and front sway bar relocating brackets ensure everything is aligned properly. All this adds up to the ultimate Dodge Ram suspension lift kit.
Dramatic improvement in ride quality and handling, reduces bump steer
More suspension articulation for off-roading
Simple bolt-on installation
Greaseable and Re-Buildable Flex Joints to reduce suspension binding
Eliminates factory OEM cam bolts
Upgrade kit fits all Tuff Country lift kits and a variety of other mfg's lift kits
Adjustable lower control arms length allows for centering of tire in wheel well
Pitman arm & track bar relocating bracket included
Limited Lifetime Warranty
Allows use of 36" x 12.5" tires
Amount of Lift: 4.5" Front / 2" Rear
LIMITED LIFETIME WARRANTY!
This System Includes... Quantity
4.5" Upper coil spring tower brackets 2
Lower Adjustable Length Control Arms 2
Upper Control Arms 2
Long Arm Mounting Brackets 2
Track bar bracket 1
Upper sway bar drop brackets 2
Pitman arm 1
2" cast iron rear lift blocks 2
Rear U-bolts 4
Poly & sleeve kit 1
Hardware bag 1
REPLACEMENT SHOCKS NOT INCLUDED WITH THIS KIT
Fits following years:
Fits following models:
Ram 2500 4x4, Ram 3500 4x4
Factory length shocks must be replaced with new extended rear shocks to install this lift kit properly. Please read below for shock & boot options if you have not already purchased extended shocks.
Will not fit with Off-Roadster models
Vehicles with 2 piece rear drive shafts may require carrier bearing drop kit
Write the First Review!
You must login to post a review.