Top Gun Customz
is proud to introduce our Heavy Duty Steel Fabricated Rear Blocks
for the Dodge Ram 2500/3500 4x4. Also fits the Ram 1500/2500/3500 Mega Cab Models.
This is a product any owner of a lifted Dodge would want and is a hand fabricated
rear lift block. Our rear blocks come in more sizes than any of our competition. We offer them in 1 - 6 inch heights, in half inch increments, (i.e. 1, 1.5, 2, 2.5 inch, etc....up to 6 inches).
What are some features that make our blocks different than almost any other lift block out there? Unlike cast iron blocks, which are weak, course and sometimes raw with no finish, our blocks are fabricated from steel plate with a smooth black finish and are fully gusseted, making them stronger than any cast block. And of course all of our blocks come with a LIFETIME GUARANTEE! We think you will agree this the best lift block for the rear of these trucks, bar none! We feel so strong about it, we will give you a 100% refund of the purchase price plus shipping if you're not fully satisfied with your purchase.
These trucks use a dual center pin on the rear spring. Our blocks have 3 holes on the top side which the pins seat into. This "locks" the block with the spring. Most companies use a "universal" rear block. Look at the comparison image for reference. A "universal" or "one block fits all" block does not have specific holes for the pins. The central pin will sit in the central hole in that block, while the outer pins will simply sit in the oversize void on each end. This does NOT
lock the block in from side to side and can cause the block to shift around from side to side. Also, the pin is usually a universal size pin and not specific to these trucks. Our pins are the correct size to fit securely on the axle and the holes on the Top side of the block, allowing the spring pins to sit securely in with zero movement.3 hole locking feature, securely locking our blocks in place3 inches wide just like the spring and the spring pad to ensure an even surface contact with the block and springNot cast, but fabricated steel plate, ensuring the most reliable and heavy duty block on the market Smooth black finish to ensure less rusting compared to normal cast iron blocks
Our blocks are 3 inches wide, just like the spring and the spring pad. Why mount a block that is 2.25 inches wide under a spring that is 3 inches wide? A full 3/4 inch of the spring will not contact with the block. The smaller sizes have no taper, while the larger sizes have the proper taper and/or angle. (2) Heavy Duty Steel Fabricated Rear Blocks
(4) Rear U-Bolts
All Necessary Hardware and Detailed Instructions
Must know exact axle size to ensure proper U-bolts are received.