Top Gun Customz has solved an issue that has plagued many Dodge owners- what to do with the reservoir if you run reservoir shocks inside your coil spring. We have developed a visually appealing way to do just that. These brackets bolt between the Top of your coil bucket and the upper shock tripod mount. They are made from laser cut steel and use a 2" diameter tube that is capped on each end for aesthetics. Most reservoirs on the market are 2". The reservoir and mount are the same size. This means you can use billet clamps to mount them (as shown). You can also use standard hose clamps.
(1) Driver side reservoir mount (1) Passenger side reservoir mount
If you have a full spring lift (no spacers), you will need to purchase our stud ring which provides you with longer studs for the upper shock tripod. The factory studs will not allow for the thickness of another bracket. If you run spacers, they usually have longer studs to allow for the additional thickness, so in that case, no additional parts are needed.